#!/bin/sh
# Configuration script for GNU CC
#   Copyright (C) 1988, 90, 91, 92, 93, 1994 Free Software Foundation, Inc.

#This file is part of GNU CC.

#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.

#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING.  If not, write to
#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

#
# Shell script to create proper links to machine-dependent files in
# preparation for compiling cc.
#
# Options: --srcdir=DIR		specifies directory where sources are.
# 	   --host=HOST		specifies host configuration.
#	   --target=TARGET	specifies target configuration.
#	   --build=TARGET	specifies configuration of machine you are
#				using to compile GCC.
#	   --prefix=DIR		specifies directory to install in.
#	   --local-prefix=DIR	specifies directory to put local ./include in.
#	   --gxx-include-dir=DIR specifies directory to put g++ header files in.
#	   --exec-prefix=DIR	specifies directory to install executables in.
#	   --with-gnu-ld	arrange to work with GNU ld.
#	   --with-gnu-as	arrange to work with GAS.
#	   --with-stabs		arrange to use stabs instead of host debug format.
#	   --with-elf		arrange to use elf instead of host debug format.
#	   --nfp		assume system has no FPU.
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo, 
# 	config.status is removed.
#

progname=$0

# Default --srcdir to the directory where the script is found, 
# if a directory was specified.
# The second sed call is to convert `.//configure' to `./configure'.
srcdir=`echo $0 | sed 's|//|/|' | sed 's|/[^/]*$||'`

if [ x$srcdir = x$0 ]
then
srcdir=
fi

host=

# Default prefix to /usr/local.
prefix=/usr/local

# local_prefix specifies where to find the directory /usr/local/include
# We don't use $(prefix) for this
# because we always want GCC to search /usr/local/include
# even if GCC is installed somewhere other than /usr/local.
# Think THREE TIMES before specifying any other value for this!
# DO NOT make this use $prefix!
local_prefix=/usr/local
# Default is to let the Makefile set exec_prefix from $(prefix)
exec_prefix='$(prefix)'
#
# The default g++ include directory is $(libdir)/g++-include.
gxx_include_dir='$(libdir)/g++-include'

remove=rm
hard_link=ln
symbolic_link='ln -s'
copy=cp

# Record all the arguments, to write them in config.status.
arguments=$*

#for Test
#remove="echo rm"
#hard_link="echo ln"
#symbolic_link="echo ln -s"

target=
host=
build=
name1=
name2=

for arg in $*;
do
  case $next_arg in
  --srcdir)
    srcdir=$arg
    next_arg=
    ;;
  --host)
    host=$arg
    next_arg=
    ;;
  --target)
    target=$arg
    next_arg=
    ;;
  --build)
    build=$arg
    next_arg=
    ;;
  --prefix)
    prefix=$arg
    next_arg=
    ;;
  --local-prefix)
    local_prefix=$arg
    next_arg=
    ;;
  --gxx-include-dir)
    gxx_include_dir=$arg
    next_arg=
    ;;
  --exec-prefix)
    exec_prefix=$arg
    next_arg=
    ;;
  *)
    case $arg in
      -*)
	if [ x$name1 != x ]
	then
		echo "Positional arguments must be last." 1>&2
		exit 1
	fi
	;;
    esac

    case $arg in
     -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
	next_arg=--srcdir
	;;
     -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
	srcdir=`echo $arg | sed 's/-*s[a-z]*=//'`
	;;
     -host | --host | --hos | --ho)
	next_arg=--host
	;;
     -host=* | --host=* | --hos=* | --ho=*)
	host=`echo $arg | sed 's/-*h[a-z]*=//'`
	;; 
     -target | --target | --targe | --targ | --tar | --ta | --t)
	next_arg=--target
	;;
     -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
	target=`echo $arg | sed 's/-*t[a-z]*=//'`
	;; 
     -build | --build | --buil | --bui | --bu | --b)
	next_arg=--build
	;;
     -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*)
	build=`echo $arg | sed 's/-*b[a-z]*=//'`
	;; 
     -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
	next_arg=--prefix
	;;
     -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
	prefix=`echo $arg | sed 's/-*p[a-z]*=//'`
	;;
     -local-prefix | --local-prefix | --local-prefi | --local-pref | --local-pre \
	| --local-pr | --local-p | --local- | --local | --loc | --lo | --l)
	next_arg=--local-prefix
	;;
     -local-prefix=* | --local-prefix=* | --local-prefi=* | --local-pref=* \
	| --local-pre=* | --local-pr=* | --local-p=* | --local-=* | --local=* \
	| --loc=* | --lo=* | --l=*)
	local_prefix=`echo $arg | sed 's/-*l[-a-z]*=//'`
	;;
     -gxx-include-dir | --gxx-include-dir | --gxx-include \
	| --gxx-incl | --gxx-inc | --gxx-in | --gxx-i | --gxx- \
	| --gxx | --gxx | --gx | --g)
	next_arg=--gxx-include-dir
	;;
     -gxx-include-dir=* | --gxx-include-dir=* | --gxx-include=* \
	| --gxx-incl=* | --gxx-inc=* | --gxx-in=* | --gxx-i=* \
	| --gxx-=* | --gxx=* | --gxx=* | --gxx=* | --g=*)
	gxx_include_dir=`echo $arg | sed 's/-*g[-a-z]*=//'`
	;;
     -exec-prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre \
	| --exec-pr | --exec-p | --exec- | --exec | --exe | --ex | --e)
	next_arg=--exec-prefix
	;;
     -exec-prefix=* | --exec-prefix=* | --exec-prefi=* | --exec-pref=* \
	| --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* | --exec=* \
	| --exe=* | --ex=* | --e=*)
	exec_prefix=`echo $arg | sed 's/-*e[-a-z]*=//'`
	;;
     -with-gnu-ld | --with-gnu-ld | --with-gnu-l)
	gnu_ld=yes
	;;
     -gas | --gas | --ga | --g | -with-gnu-as | --with-gnu-as | -with-gnu-a)
        gas=yes
	;;
     -nfp | --nfp | --nf | --n)
	nfp=yes
	;;
     -with-stabs | -with-stab | -with-sta | -with-st | -with-s \
	| --with-stabs | --with-stab | --with-sta | --with-st | --with-s \
	| -stabs | -stab | -sta | -st  \
	| --stabs | --stab | --sta | --st)
	stabs=yes
	;;
     -with-elf | -with-el | -with-se \
	| --with-elf | --with-el | --with-e \
	| -elf | -el | -e \
	|--elf | --el | --e)
	elf=yes
	;;
     -with-* | --with-*) ;; #ignored
     -without-* | --without-*) ;; #ignored
     -enable-* | --enable-*) ;; #ignored
     -x | --x) ;; # ignored
     --he*) ;; # ignored for now (--help)
     --vers*) ;; # ignored for now (--version)
     --verb*) ;; # ignored for now (--verbose)
     --program-*) ;; #ignored (--program-prefix, --program-suffix)
     --c*) ;; #ignored (--cache-file)
     --q*) ;; #ignored (--quiet)
     --si*) ;; #ignored (--silent)
     -*)
	echo "Invalid option \`$arg'" 1>&2
	exit 1
	;;
     *)
# Allow configure HOST TARGET.  If just one name is given, it is used
# as both unless a host was previously given, in which case it is
# just the target.
	if [ x$name1 != x ]
	then
		if [ x$name2 != x ]
		then
			echo "More than two configuration names." 1>&2
			exit 1
		fi
		name2=$arg
	elif [ x$host != x ]
	then
		name1=$host
		name2=$arg
		host=
	else
		name1=$arg
	fi
	;;
    esac
  esac
done

if [ x$name1 != x ]
then
	if [ x$name2 = x ]
	then
		name2=$name1
	fi

	if [ x$host != x ]
	then
		echo "Duplicate specification of host." 1>&2
		exit 1
	fi

	if [ x$target != x ]
	then
		echo "Duplicate specification of target." 1>&2
		exit 1
	fi

	host=$name1
	build=$name1
	target=$name2
fi

# Find the source files, if location was not specified.
if [ x$srcdir = x ]
then
	srcdirdefaulted=1
	srcdir=.
	if [ ! -r tree.c ]
	then
		srcdir=..
	fi
fi

#if [ ! -r ${srcdir}/tree.c ]
#then
#	if [ x$srcdirdefaulted = x ]
#	then
#	  echo "$progname: Can't find compiler sources in \`${srcdir}'" 1>&2
#	else
#	  echo "$progname: Can't find compiler sources in \`.' or \`..'" 1>&2
#	fi
#	exit 1
#fi

if [ -r ${srcdir}/config.status ] && [ x$srcdir != x. ]
then
	echo "$progname: \`configure' has been run in \`${srcdir}'" 1>&2
	exit 1
fi

# Complain if an arg is missing
if [ x$build = x ]
then
	# If host was specified, always use it for build also to avoid
	# confusion.  If someone wants a cross compiler where build != host,
	# then they must specify build explicitly.  Since this case is
	# extremely rare, it does not matter that it is slightly inconvenient.
	if [ x$host != x ]
	then
		build=$host
	
	# This way of testing the result of a command substitution is
	# defined by Posix.2 (section 3.9.1) as well as traditional shells.
	elif build=`./config.guess`
	then
		echo "This appears to be a ${build} system." 1>&2

	elif [ x$target != x ]
	then
		echo 'Config.guess failed to determine the host type.  Defaulting to target.'
		build=$target
	else
		echo 'Config.guess failed to determine the host type.  You need to specify one.' 1>&2
		echo "\
Usage: `basename $progname` [--host=HOST] [--build=BUILD]
       [--prefix=DIR] [--gxx-include-dir=DIR] [--local-pref=DIR] [--exec-pref=DIR]
       [--with-gnu-as] [--with-gnu-ld] [--with-stabs] [--with-elf] [--nfp] TARGET" 1>&2
	echo "Where HOST, TARGET and BUILD are three-part configuration names " 1>&2
		if [ -r config.status ]
		then
			tail +2 config.status 1>&2
		fi
		exit 1
	fi
fi

if test -z "$CC"; then
  # Extract the first word of `cc', so it can be a program name with args.
  set dummy cc; word=$2
  echo checking for $word
  IFS="${IFS=   }"; saveifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/$word; then
      CC="cc"
      break
    fi
  done
  IFS="$saveifs"
fi
test -z "$CC" && CC="cc"
test -n "$CC" -a -n "$verbose" && echo "        setting CC to $CC"
#echo $CC

LIBS=""

# If $host was not specified, use $build.
if [ x$host = x ]
then
	host=$build
fi

# If $target was not specified, use $host.
if [ x$target = x ]
then
	target=$host
fi

build_xm_file=
host_xm_file=
host_xmake_file=
host_broken_install=
host_install_headers_dir=install-headers-tar
host_truncate_target=

# Validate the specs, and canonicalize them.
canon_build=`/bin/sh ./config.sub $build` || exit 1
canon_host=`/bin/sh ./config.sub $host` || exit 1
canon_target=`/bin/sh ./config.sub $target` || exit 1

# Decode the host machine, then the target machine.
# For the host machine, we save the xm_file variable as host_xm_file;
# then we decode the target machine and forget everything else
# that came from the host machine.
#for machine in $canon_build $canon_host $canon_target; do
for machine in $canon_build; do

#	cpu_type=
	cpu_type=`echo $machine | sed -e 's/-.*//'`
	xm_file=
	tm_file=
	out_file=
	xmake_file=
	tmake_file=
	header_files=
	extra_passes=
	extra_parts=
	extra_programs=
	extra_objs=
	# Set this to force installation and use of collect2.
	use_collect2=
	# Set this to override the default target model.
	target_cpu_default=
	# Set this to force use of install.sh.
	broken_install=
	# Set this to control which fixincludes program to use.
	fixincludes=fixincludes
	# Set this to control how the header file directory is installed.
	install_headers_dir=install-headers-tar
	# Set this to a non-empty list of args to pass to cpp if the target
	# wants its .md file passed through cpp.
	md_cppflags=
	# Set this if directory names should be truncated to 14 characters.
	truncate_target=

	case $machine in
	# Support site-specific machine types.
	*local*)
		cpu_type=`echo $machine | sed -e 's/-.*//'`
#		rest=`echo $machine | sed -e "s/$cpu_type-//"`
#		xm_file=${cpu_type}/xm-$rest.h
#		tm_file=${cpu_type}/$rest.h
#		if [ -f $srcdir/config/${cpu_type}/x-$rest ] ; \
#		then xmake_file=${cpu_type}/x-$rest; \
#		else true; \
#		fi
#		if [ -f $srcdir/config/${cpu_type}/t-$rest ] ; \
#		then tmake_file=${cpu_type}/t-$rest; \
#		else true; \
#		fi
		;;
	1750a-*-*)
		;;
	a29k-*-bsd*)
		CFLAGS="-D_BSD"
		;;
	a29k-*-*)			# Default a29k environment.
		;;
	alpha-dec-osf[23456789]*)	#ggyy
		CFLAGS="-DALPHA -DOSF1 -D_BSD"
#for i in host nnrp nntp util; do (echo $cpu_type); done
		;;
	alpha-dec-osf1.2)
		CFLAGS="-DALPHA -DOSF1 -D_BSD"
		;;
	alpha-*-osf*)
		CFLAGS="-DALPHA -DOSF1 -D_BSD"
		;;
	arm-*-riscix1.[01]*)		# Acorn RISC machine (early versions)
		;;
	arm-*-riscix*)			# Acorn RISC machine
		;;
	arm-*-*)			# generic version
		;;
	c1-convex-*)			# Convex C1
		;;
	c2-convex-*)			# Convex C2
		;;
	c32-convex-*)
		;;
	c34-convex-*)
		;;
	c38-convex-*)
		;;
	clipper-intergraph-clix*)
		;;
	dsp16xx-*)
		;;
	elxsi-elxsi-*)
		;;
	fx80-alliant-*)			# Alliant FX/80
		;;
	h8300-*-*)
		;;
	hppa1.1-*-osf*)
		CFLAGS="-DALPHA -DOSF1 -D_BSD"
		;;
	hppa1.0-*-osf*)
		CFLAGS="-DALPHA -DOSF1 -D_BSD"
		;;
	hppa1.1-*-bsd*)
		CFLAGS="-DIGNORE_NNTP_ERROR -D_BSD"
		;;
	hppa1.0-*-bsd*)
		CFLAGS="-DIGNORE_NNTP_ERROR -D_BSD"
		;;
	hppa1.0-*-hpux7*)
		CFLAGS="-DHPPA -DSYSV4 -Dhpux"
		;;
	hppa1.0-*-hpux8.0[0-2]*)
		CFLAGS="-DHPPA -DSYSV4 -Dhpux"
		;;
	hppa1.1-*-hpux8.0[0-2]*)
		CFLAGS="-DHPPA -DSYSV4 -Dhpux"
		;;
	hppa1.1-*-hpux*)
		CFLAGS="-DHPPA -DSYSV4 -Dhpux"
		;;
	hppa1.0-*-hpux*)
		CFLAGS="-DHPPA -DSYSV4 -Dhpux"
		;;
	hppa1.1-*-hiux*)
#		cpu_type=pa
#		xm_file=pa/xm-pahiux.h
#		xmake_file=pa/x-pa-hiux
#		tmake_file=pa/t-pa-hpux
#		if [ x$gas = xyes ]
#		then
#			tm_file=pa/pa1-ghiux.h
#		else
#			tm_file=pa/pa1-hiux.h
#		fi
#		broken_install=yes
#		install_headers_dir=install-headers-cpio
#		use_collect2=yes
		;;
	hppa1.0-*-hiux*)
#		cpu_type=pa
#		xm_file=pa/xm-pahiux.h
#		xmake_file=pa/x-pa-hiux
#		tmake_file=pa/t-pa-hpux
#		if [ x$gas = xyes ]
#		then
#			tm_file=pa/pa-ghiux.h
#		else
#			tm_file=pa/pa-hiux.h
#		fi
#		broken_install=yes
#		install_headers_dir=install-headers-cpio
#		use_collect2=yes
		;;
	i370-*-mvs*)
#		cpu_type=i370
#		tm_file=i370/mvs.h
#		xm_file=i370/xm-mvs.h
#		out_file=i370/mvs370.c
		;;
	i[345]86-ibm-aix*)		# IBM PS/2 running AIX
#		cpu_type=i386
#               if [ x$gas = xyes ]
#		then
#			tm_file=i386/aix386.h
#			extra_parts="crtbegin.o crtend.o"
#		else
#			tm_file=i386/aix386ng.h
#			use_collect2=yes
#		fi
#		xm_file=i386/xm-aix.h
#		xmake_file=i386/x-aix
#		broken_install=yes
		;;
	i486-ncr-sysv4*)		# NCR 3000 - i486 running system V.4
		cpu_type=i386
		xm_file=i386/xm-sysv4.h
		xmake_file=i386/x-ncr3000
		tm_file=i386/sysv4.h
		tmake_file=t-svr4
		;;
	i[345]86-next-*)
		cpu_type=i386
		tm_file=i386/next.h
		out_file=i386/next.c
		xm_file=i386/xm-next.h
		tmake_file=i386/t-next
		xmake_file=i386/x-next
		;;
	i[345]86-sequent-bsd*) 		# 80386 from Sequent
		cpu_type=i386
		use_collect2=yes
		if [ x$gas = xyes ]
		then
			tm_file=i386/seq-gas.h
		else
			tm_file=i386/sequent.h
		fi
		;;
	i[345]86-sequent-ptx1*)
		cpu_type=i386
		xm_file=i386/xm-sysv3.h
		xmake_file=i386/x-sysv3
		tm_file=i386/seq-sysv3.h
		tmake_file=t-svr3
		fixincludes=fixinc.ptx
		extra_parts="crtbegin.o crtend.o"
		install_headers_dir=install-headers-cpio
		broken_install=yes
		;;
	i[345]86-sequent-ptx2* | i[345]86-sequent-sysv*)
		cpu_type=i386
		xm_file=i386/xm-sysv3.h
		xmake_file=i386/x-sysv3
		tm_file=i386/seq2-sysv3.h
		tmake_file=t-svr3
		extra_parts="crtbegin.o crtend.o"
		fixincludes=fixinc.ptx
		install_headers_dir=install-headers-cpio
		broken_install=yes
		;;
	i386-sun-sunos*)		# Sun i386 roadrunner
		xm_file=i386/xm-sun.h
		tm_file=i386/sun.h
		use_collect2=yes
		;;
	i[345]86-*-bsdi* | i[345]86-*-bsd386*)
		cpu_type=i386
		tm_file=i386/bsd386.h
#		tmake_file=t-libc-ok
		;;
	i[345]86-*-bsd*)
		cpu_type=i386
		tm_file=i386/386bsd.h
#		tmake_file=t-libc-ok
# Next line turned off because both 386BSD and BSD/386 use GNU ld.
#		use_collect2=yes
		;;
	i[345]86-*-freebsd*)
		cpu_type=i386
		tm_file=i386/freebsd.h
		# On FreeBSD, the headers are already ok.
		fixincludes=Makefile.in
		xmake_file=i386/x-freebsd
		CFLAGS="-DFREEBSD -DNOMALLOC -DTELL"
		LIBS="-lcrypt"
		;;
	i[345]86-*-netbsd*)
#		cpu_type=i386
#		tm_file=i386/netbsd-i386.h
#		# On NetBSD, the headers are already okay.
#		fixincludes=Makefile.in
#		xmake_file=x-netbsd
		CFLAGS="-DNETBSD -DTELL"
		;;
	i[345]86-*-gnu*)
		cpu_type=i386
		xm_file=i386/xm-gnu.h
		tm_file=i386/gnu.h
		tmake_file=t-libc-ok
		# GNU tools are the only tools.
		gnu_ld=yes
		gas=yes
		# On GNU, the headers are already okay.
		fixincludes=Makefile.in
		;;
	i[345]86-*-isc*)		# 80386 running ISC system
		cpu_type=i386
		xm_file=i386/xm-isc.h
		case $machine in
		  i[345]86-*-isc[34]*)
		    xmake_file=i386/x-isc3
		    ;;
		  *)
		    xmake_file=i386/x-isc
		    ;;
		esac
		echo $xmake_file
                if [ x$gas = xyes -a x$stabs = xyes ]
		then
			tm_file=i386/iscdbx.h
			tmake_file=i386/t-svr3dbx
		else
			tm_file=i386/isccoff.h
			extra_parts="crtbegin.o crtend.o"
		fi
		install_headers_dir=install-headers-cpio
		broken_install=yes
		;;
	i[345]86-*-linux*)		# Intel 80386's running Linux
		CFLAGS="-DLINUX"
		LIBS="-lbsd"
		;;
	i[345]86-*-lynxos*)
		;;
	i[345]86-*-mach*)
		cpu_type=i386
		tm_file=i386/mach.h
#		tmake_file=t-libc-ok
		use_collect2=yes
		;;
	i[345]86-*-osfrose*)		# 386 using OSF/rose
		cpu_type=i386
                if [ x$elf = xyes ]
		then
			tm_file=i386/osfelf.h
			use_collect2=
		else
			tm_file=i386/osfrose.h
			use_collect2=yes
		fi
		xm_file=i386/xm-osf.h
		xmake_file=i386/x-osfrose
		extra_objs=halfpic.o
		;;
	i[345]86-*-sco3.2v4*)	 	# 80386 running SCO 3.2v4 system
		cpu_type=i386
		xm_file=i386/xm-sco.h
		xmake_file=i386/x-sco4
		fixincludes=fixinc.sco
		broken_install=yes
		install_headers_dir=install-headers-cpio
                if [ x$stabs = xyes ]
		then
			tm_file=i386/sco4dbx.h
			tmake_file=i386/t-svr3dbx
		else
			tm_file=i386/sco4.h
			extra_parts="crtbegin.o crtend.o"
		fi
		;;
	i[345]86-*-sco*)	 	# 80386 running SCO system
		cpu_type=i386
		xm_file=i386/xm-sco.h
		xmake_file=i386/x-sco
		broken_install=yes
		install_headers_dir=install-headers-cpio
                if [ x$stabs = xyes ]
		then
			tm_file=i386/scodbx.h
			tmake_file=i386/t-svr3dbx
		else
			tm_file=i386/sco.h
			extra_parts="crtbegin.o crtend.o"
		fi
		truncate_target=yes
		;;
	i[345]86-*-solaris2* | i[345]86-*-sunos5*)
		cpu_type=i386
		xm_file=i386/xm-sysv4.h
		tm_file=i386/sol2.h
		tmake_file=i386/t-sol2
		extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o"
		xmake_file=x-svr4
		fixincludes=fixinc.svr4
		broken_install=yes
		;;
	i[345]86-*-sysv4*)		# Intel 80386's running system V.4
		cpu_type=i386
		xm_file=i386/xm-sysv4.h
		if [ x$stabs = xyes ]
		then
			tm_file=i386/sysv4gdb.h
		else
			tm_file=i386/sysv4.h
		fi
		tmake_file=t-svr4
		xmake_file=x-svr4
		;;
	i[345]86-*-sysv*)		# Intel 80386's running system V
		cpu_type=i386
		xm_file=i386/xm-sysv3.h
		xmake_file=i386/x-sysv3
		if [ x$gas = xyes ]
		then
			if [ x$stabs = xyes ]
			then
				tm_file=i386/svr3dbx.h
				tmake_file=i386/t-svr3dbx
			else
				tm_file=i386/svr3gas.h
				extra_parts="crtbegin.o crtend.o"
			fi
		else
			tm_file=i386/sysv3.h
			extra_parts="crtbegin.o crtend.o"
		fi
		;;
	i[345]86-*-winnt3*)
		cpu_type=i386
		tm_file=i386/winnt.h
		out_file=i386/i386.c
		xm_file=i386/xm-winnt.h
		xmake_file=i386/x-winnt
		if [ x$gnu_ld != xyes ]
		then
			extra_programs=ld
		fi
		;;
	i860-alliant-*)		# Alliant FX/2800
		xm_file=i860/xm-fx2800.h
		xmake_file=i860/x-fx2800
		tm_file=i860/fx2800.h
		tmake_file=i860/t-fx2800
		extra_parts="crtbegin.o crtend.o"
		;;
	i860-*-bsd*)
		if [ x$gas = xyes ]
		then
			tm_file=i860/bsd-gas.h
		else
			tm_file=i860/bsd.h
		fi
		use_collect2=yes
		;;
	i860-*-mach*)
		xm_file=i860/xm-i860.h
		tm_file=i860/mach.h
		tmake_file=t-libc-ok
		;;
	i860-*-osf*)			# Intel Paragon XP/S, OSF/1AD
		xm_file=i860/xm-paragon.h
		tm_file=i860/paragon.h
		tmake_file=t-osf
		broken_install=yes
		;;
	i860-*-sysv3*)
		xm_file=i860/xm-sysv3.h
		xmake_file=i860/x-sysv3
		tm_file=i860/sysv3.h
		extra_parts="crtbegin.o crtend.o"
		;;
	i860-*-sysv4*)
		xm_file=i860/xm-sysv4.h
		xmake_file=i860/x-sysv4
		tm_file=i860/sysv4.h
		tmake_file=t-svr4
		;;
	i960-*-coff*)
		tmake_file=i960/t-960bare
		tm_file=i960/i960-coff.h
		use_collect2=yes
		;;
	i960-*-*)			# Default i960 environment.
		use_collect2=yes
		;;
	m68000-convergent-sysv*)
		cpu_type=m68k
		xm_file=m68k/xm-3b1.h
		tm_file=m68k/ctix.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68000-hp-bsd*)			# HP 9000/200 running BSD
		cpu_type=m68k
		tm_file=m68k/hp2bsd.h
		xmake_file=m68k/x-hp2bsd
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68000-hp-hpux*)		# HP 9000 series 300
		cpu_type=m68k
		xm_file=m68k/xm-hp320.h
		if [ x$gas = xyes ]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp310g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hp310.h
		fi
		broken_install=yes
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68000-sun-sunos3*)
		cpu_type=m68k
		tm_file=m68k/sun2.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68000-sun-sunos4*)
		cpu_type=m68k
		tm_file=m68k/sun2o4.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68000-att-sysv*)
		cpu_type=m68k
		xm_file=m68k/xm-3b1.h
		if [ x$gas = xyes ]
		then
			tm_file=m68k/3b1g.h
		else
			tm_file=m68k/3b1.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-apollo-*)
		xmake_file=m68k/x-apollo68
		tm_file=m68k/apollo68.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-altos-sysv*)		   # Altos 3068
		if [ x$gas = xyes ]
		then
		        xm_file=m68k/xm-altos3068.h
		        tm_file=m68k/altos3068.h
		else
			echo "The Altos is supported only with the GNU assembler" 1>&2
			exit 1
		fi
		header_files=math-68881.h
	        ;;
	m68k-bull-sysv*)		# Bull DPX/2
		if [ x$gas = xyes ]
		then
			if [ x$stabs = xyes ]
			then
				tm_file=m68k/dpx2cdbx.h
			else
				tm_file=m68k/dpx2g.h
			fi
		else
			tm_file=m68k/dpx2.h
		fi
		xm_file=m68k/xm-m68kv.h
		xmake_file=m68k/x-dpx2
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-atari-sysv4*)              # Atari variant of V.4.
		tm_file=m68k/atari.h
		xm_file=m68k/xm-atari.h
		tmake_file=t-svr4
		header_files=math-68881.h
		;;
	m68k-motorola-sysv*)
		xm_file=m68k/xm-mot3300.h
		xmake_file=m68k/x-alloca-c
		if [ x$gas = xyes ]
		then
			tm_file=m68k/mot3300g.h
		else
			tm_file=m68k/mot3300.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-ncr-sysv*)			# NCR Tower 32 SVR3
		tm_file=m68k/tower-as.h
		xm_file=m68k/xm-tower.h
		xmake_file=m68k/x-tower
		extra_parts="crtbegin.o crtend.o"
		header_files=math-68881.h
		;;
        m68k-plexus-sysv*)
		tm_file=m68k/plexus.h
		xm_file=m68k/xm-plexus.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-tti-*)
		tm_file=m68k/pbb.h
		xm_file=m68k/xm-m68kv.h
		header_files=math-68881.h
		;;
	m68k-crds-unos*)
		xm_file=m68k/xm-crds.h
		xmake_file=m68k/x-crds
		tm_file=m68k/crds.h
		broken_install=yes
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-cbm-sysv4*)		# Commodore variant of V.4.
		tm_file=m68k/amix.h
		xm_file=m68k/xm-amix.h
		xmake_file=m68k/x-amix
		tmake_file=t-svr4
		header_files=math-68881.h
		;;
	m68k-ccur-rtu)
		tm_file=m68k/ccur-GAS.h
		xmake_file=m68k/x-ccur
		header_files=math-68881.h
		use_collect2=yes
		broken_install=yes
		;;
	m68k-hp-bsd4.4*)		# HP 9000/3xx running 4.4bsd
		tm_file=m68k/hp3bsd44.h
		xmake_file=m68k/x-hp3bsd44
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-hp-bsd*)			# HP 9000/3xx running Berkeley Unix
		tm_file=m68k/hp3bsd.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-isi-bsd*)
		if [ x$nfp = xyes ]
		then
			tm_file=m68k/isi-nfp.h
		else
			tm_file=m68k/isi.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-hp-hpux7*)	# HP 9000 series 300 running HPUX version 7.
		xm_file=m68k/xm-hp320.h
		if [ x$gas = xyes ]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp320g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hpux7.h
		fi
		broken_install=yes
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-hp-hpux*)	# HP 9000 series 300
		xm_file=m68k/xm-hp320.h
		if [ x$gas = xyes ]
		then
			xmake_file=m68k/x-hp320g
			tm_file=m68k/hp320g.h
		else
			xmake_file=m68k/x-hp320
			tm_file=m68k/hp320.h
		fi
		broken_install=yes
		install_headers_dir=install-headers-cpio
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-sun-mach*)
		tm_file=m68k/sun3mach.h
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-sony-newsos3*)
		if [ x$gas = xyes ]
		then
			tm_file=m68k/news3gas.h
		else
			tm_file=m68k/news3.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-sony-bsd* | m68k-sony-newsos*)
		if [ x$gas = xyes ]
		then
			tm_file=m68k/newsgas.h
		else
			tm_file=m68k/news.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-next-nextstep2*)
		CFLAGS="-DNEXTSTEP -D_POSIX_SOURCE -DNOMALLOC"
                ;;
	m68k-next-nextstep3*)
		CFLAGS="-DNEXTSTEP -D_POSIX_SOURCE -DNOMALLOC"
		;;
	m68k-sun-sunos3*)
		if [ x$nfp = xyes ]
		then
			tm_file=m68k/sun3n3.h
		else
			tm_file=m68k/sun3o3.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-sun-sunos* | m68k-wrs-vxworks)	# For SunOS 4 (the default).
		if [ x$nfp = xyes ]
		then
			tm_file=m68k/sun3n.h
		else
			tm_file=m68k/sun3.h
		fi
		use_collect2=yes
		header_files=math-68881.h
		;;
	m68k-*-lynxos*)
		if [ x$gas = xyes ]
		then
			tm_file=m68k/lynx.h
		else
			tm_file=m68k/lynx-ng.h
		fi
		xm_file=xm-lynx.h
		xmake_file=x-lynx
		header_files=math-68881.h
		;;
	m68k-*-netbsd*)
		CFLAGS="-DNETBSD -DTELL"
		cpu_type=m68k
		tm_file=m68k/netbsd-m68k.h
		# On NetBSD, the headers are already okay.
		fixincludes=Makefile.in
		xmake_file=x-netbsd
		;;
	m68k-*-sysv3*)			# Motorola m68k's running system V.3
		xm_file=m68k/xm-m68kv.h
		xmake_file=m68k/x-m68kv
		extra_parts="crtbegin.o crtend.o"
		header_files=math-68881.h
		;;
	m68k-*-sysv4*)			# Motorola m68k's running system V.4
		tm_file=m68k/m68kv4.h
		xm_file=m68k/xm-m68kv.h
		tmake_file=t-svr4
		header_files=math-68881.h
		;;
	m88k-dg-dgux*)
		case $machine in
		  m88k-dg-dguxbcs*)
		    tm_file=m88k/dguxbcs.h
		    xmake_file=m88k/x-dguxbcs
		    ;;
		  *)
		    tm_file=m88k/dgux.h
		    xmake_file=m88k/x-dgux
		    ;;
		esac
		extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
		broken_install=yes
		if [ x$gas = xyes ]
		then
			tmake_file=m88k/t-dgux-gas
		else
			tmake_file=m88k/t-dgux
		fi
		fixincludes=fixinc.dgux
		;;
	m88k-dolphin-sysv3*)
		tm_file=m88k/dolph.h
		extra_parts="crtbegin.o crtend.o"
		xm_file=m88k/xm-sysv3.h
		xmake_file=m88k/x-dolph
		if [ x$gas = xyes ]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-tektronix-sysv3)
		tm_file=m88k/tekXD88.h
		extra_parts="crtbegin.o crtend.o"
		xm_file=m88k/xm-sysv3.h
		xmake_file=m88k/x-tekXD88
		if [ x$gas = xyes ]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-mot*-sysv4*)
		tm_file=m88k/mot-sysv4.h
		extra_parts="crtbegin.o crtend.o"
		xmake_file=m88k/x-sysv4
		tmake_file=m88k/t-sysv4
		;;
	m88k-*-luna*)
		tm_file=m88k/luna.h
		extra_parts="crtbegin.o crtend.o"
		if [ x$gas = xyes ]
		then
			tmake_file=m88k/t-luna-gas
		else
			tmake_file=m88k/t-luna
		fi
		;;
	m88k-*-sysv3*)
		tm_file=m88k/sysv3.h
		extra_parts="crtbegin.o crtend.o"
		xm_file=m88k/xm-sysv3.h
		xmake_file=m88k/x-sysv3
		if [ x$gas = xyes ]
		then
			tmake_file=m88k/t-m88k-gas
		fi
		;;
	m88k-*-sysv4*)
		tm_file=m88k/sysv4.h
		extra_parts="crtbegin.o crtend.o"
		xmake_file=m88k/x-sysv4
		tmake_file=m88k/t-sysv4
		;;
	mips-sgi-irix5*)		# SGI System V.4., IRIX 5
		if [ x$gas = xyes ]
		then
			if [ x$stabs = xyes ]
			then
				tm_file=mips/iris5gdb.h
			else
				tm_file=mips/iris5gas.h
			fi
		else
			tm_file=mips/iris5.h
		fi
		xm_file=mips/xm-iris5.h
		broken_install=yes
		fixincludes=Makefile.in
		xmake_file=mips/x-iris
		# mips-tfile doesn't work yet
		tmake_file=mips/t-mips-gas
		# See comment in mips/iris5.h file.
		use_collect2=yes
		CFLAGS="-DIRIX -DSYSV"
		;;
	mips-sgi-irix4loser*)		# Mostly like a MIPS.
		if [ x$stabs = xyes ]; then
			tm_file=mips/iris4gl.h
		else
			tm_file=mips/iris4loser.h
		fi
		xm_file=mips/xm-iris4.h
		broken_install=yes
		xmake_file=mips/x-iris
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		CFLAGS="-DIRIX -DSYSV"
		;;
	mips-sgi-irix4*)		# Mostly like a MIPS.
		if [ x$stabs = xyes ]; then
			tm_file=mips/iris4-gdb.h
		else
			tm_file=mips/iris4.h
		fi
		xm_file=mips/xm-iris4.h
		broken_install=yes
		xmake_file=mips/x-iris
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		CFLAGS="-DIRIX -DSYSV"
		;;
	mips-sgi-*)			# Mostly like a MIPS.
		if [ x$stabs = xyes ]; then
			tm_file=mips/iris3-gdb.h
		else
			tm_file=mips/iris3.h
		fi
		xm_file=mips/xm-iris3.h
		broken_install=yes
		xmake_file=mips/x-iris3
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		CFLAGS="-DIRIX -DSYSV"
		;;
	mips-dec-osfrose*)		# Decstation running OSF/1 reference port with OSF/rose.
		tm_file=mips/osfrose.h
		xmake_file=mips/x-osfrose
		tmake_file=mips/t-osfrose
		extra_objs=halfpic.o
		use_collect2=yes
		;;
	mips-dec-osf*)			# Decstation running OSF/1 as shipped by DIGITAL
		if [ x$stabs = xyes ]; then
			tm_file=mips/dec-gosf1.h
		else
			tm_file=mips/dec-osf1.h
		fi
		xmake_file=mips/x-dec-osf1
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		;;
	mips-dec-bsd*)                  # Decstation running 4.4 BSD
              tm_file=mips/dec-bsd.h
              xmake_file=
              tmake_file=
              fixincludes=
	      if [ x$gas = xyes ]
	      then
		   	tmake_file=mips/t-mips-gas
	      else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
	      fi
	      if [ x$gnu_ld != xyes ]
	      then
			use_collect2=yes
	      fi
	      ;;
	mips-sony-bsd* | mips-sony-newsos*)	# Sony NEWS 3600 or risc/news.
		if [ x$stabs = xyes ]; then
			tm_file=mips/news4-gdb.h
		else
			tm_file=mips/news4.h
		fi
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		xmake_file=mips/x-sony
		;;
	mips-sony-sysv*)		# Sony NEWS 3800 with NEWSOS5.0.
					# That is based on svr4.
		# t-svr4 is not right because this system doesn't use ELF.
		if [ x$stabs = xyes ]; then
			tm_file=mips/news5-gdb.h
		else
			tm_file=mips/news5.h
		fi
		xm_file=mips/xm-news.h
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		;;
	mips-tandem-sysv4*)		# Tandem S2 running NonStop UX
		if [ x$stabs = xyes ]; then
			tm_file=mips/svr4-t-gdb.h
		else
			tm_file=mips/svr4-t.h
		fi
		xm_file=mips/xm-sysv4.h
		xmake_file=mips/x-sysv
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-svr4-gas
		else
			tmake_file=mips/t-svr4
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-ultrix*)		# Decstation.
		if [ x$stabs = xyes ]; then
			tm_file=mips/ultrix-gdb.h
		else
			tm_file=mips/ultrix.h
		fi
		xmake_file=mips/x-ultrix
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			tmake_file=mips/t-ultrix
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
	        ;;
	mips-*-riscos[56789]bsd*)
		if [ x$stabs = xyes ]; then	# MIPS BSD 4.3, RISC-OS 5.0
			tm_file=mips/bsd-5-gdb.h
		else
			tm_file=mips/bsd-5.h
		fi
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-bsd-gas
		else
			tmake_file=mips/t-bsd
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
	        ;;
	mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd*)
		if [ x$stabs = xyes ]; then	# MIPS BSD 4.3, RISC-OS 4.0
			tm_file=mips/bsd-4-gdb.h
		else
			tm_file=mips/bsd-4.h
		fi
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-bsd-gas
		else
			tmake_file=mips/t-bsd
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
	        ;;
	mips-*-riscos[56789]sysv4*)
		if [ x$stabs = xyes ]; then	# MIPS System V.4., RISC-OS 5.0
			tm_file=mips/svr4-5-gdb.h
		else
			tm_file=mips/svr4-5.h
		fi
		xm_file=mips/xm-sysv4.h
		xmake_file=mips/x-sysv
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-svr4-gas
		else
			tmake_file=mips/t-svr4
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4*)
		if [ x$stabs = xyes ]; then	# MIPS System V.4. RISC-OS 4.0
			tm_file=mips/svr4-4-gdb.h
		else
			tm_file=mips/svr4-4.h
		fi
		xm_file=mips/xm-sysv.h
		xmake_file=mips/x-sysv
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-svr4-gas
		else
			tmake_file=mips/t-svr4
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-riscos[56789]sysv*)
		if [ x$stabs = xyes ]; then	# MIPS System V.3, RISC-OS 5.0
			tm_file=mips/svr3-5-gdb.h
		else
			tm_file=mips/svr3-5.h
		fi
		xm_file=mips/xm-sysv.h
		xmake_file=mips/x-sysv
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-svr3-gas
		else
			tmake_file=mips/t-svr3
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-sysv* | mips-*-riscos*sysv*)
		if [ x$stabs = xyes ]; then	# MIPS System V.3, RISC-OS 4.0
			tm_file=mips/svr3-4-gdb.h
		else
			tm_file=mips/svr3-4.h
		fi
		xm_file=mips/xm-sysv.h
		xmake_file=mips/x-sysv
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-svr3-gas
		else
			tmake_file=mips/t-svr3
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-riscos[56789]*)			# Default MIPS RISC-OS 5.0.
		if [ x$stabs = xyes ]; then
			tm_file=mips/mips-5-gdb.h
		else
			tm_file=mips/mips-5.h
		fi
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		broken_install=yes
		;;
	mips-*-*)				# Default MIPS RISC-OS 4.0.
		if [ x$stabs = xyes ]; then
			tm_file=mips/mips-4-gdb.h
		else
			tm_file=mips/mips.h
		fi
		if [ x$gas = xyes ]
		then
			tmake_file=mips/t-mips-gas
		else
			extra_passes="mips-tfile mips-tdump"
		fi
		if [ x$gnu_ld != xyes ]
		then
			use_collect2=yes
		fi
		;;
	ns32k-encore-bsd*)
		tm_file=ns32k/encore.h
		use_collect2=yes
		;;
	ns32k-sequent-bsd*)
		tm_file=ns32k/sequent.h
		use_collect2=yes
		;;
	ns32k-tek6100-bsd*)
		tm_file=ns32k/tek6100.h
		broken_install=yes
		use_collect2=yes
		;;
	ns32k-tek6200-bsd*)
		tm_file=ns32k/tek6200.h
		broken_install=yes
		use_collect2=yes
		;;
# This has not been updated to GCC 2.
#	ns32k-ns-genix*)
#		xm_file=ns32k/xm-genix.h
#		xmake_file=ns32k/x-genix
#		tm_file=ns32k/genix.h
#		broken_install=yes
#		use_collect2=yes
#		;;
	ns32k-merlin-*)
		tm_file=ns32k/merlin.h
		use_collect2=yes
		;;
	ns32k-pc532-mach*)
		tm_file=ns32k/pc532-mach.h
		use_collect2=yes
		;;
	ns32k-pc532-minix*)
		tm_file=ns32k/pc532-min.h
		xm_file=ns32k/xm-pc532-min.h
		use_collect2=yes
		;;
	ns32k-pc532-netbsd*)
		CFLAGS="-DNETBSD -DTELL" 
		tm_file=ns32k/netbsd.h
		xm_file=ns32k/xm-netbsd.h
		tmake_file=t-libc-ok
		# On NetBSD, the headers are already okay.
		fixincludes=Makefile.in
		xmake_file=x-netbsd
		;;
	pyramid-*-*)
		cpu_type=pyr
		xmake_file=pyr/x-pyr
		use_collect2=yes
		;;
	romp-*-aos*)
		use_collect2=yes
		;;
	romp-*-mach*)
		xmake_file=romp/x-mach
		use_collect2=yes
		;;
	powerpc-ibm-aix*)
		CFLAGS="-DRS6K -D_BSD=43 -DAIX3"
		LIBS="-lbsd"
		;;
	rs6000-ibm-aix3.[01]*)
		CFLAGS="-DRS6K -D_BSD=43 -DAIX3"
		LIBS="-lbsd"
		;;
	rs6000-ibm-aix4.1*)
		CFLAGS="-DRS6K -D_BSD=43 -DAIX4"
		LIBS="-lbsd"
		;;
	rs6000-ibm-aix*)
		CFLAGS="-DRS6K -D_BSD=43 -DAIX3"
		LIBS="-lbsd"
		;;
	rs6000-bull-bosx)
		;;
	rs6000-*-mach*)
		xm_file=rs6000/xm-mach.h
		tm_file=rs6000/mach.h
		xmake_file=rs6000/x-mach
		use_collect2=yes
		;;
	sh-*-*)
		;;
	sparc-tti-*)
		;;
	sparc-*-netbsd)
		CFLAGS="-DNETBSD -DTELL"
		;;
	sparc-*-bsd*)
		CFLAGS="-DBSD"
		;;
	sparc-*-lynxos*)
		;;
	sparc-*-solaris2* | sparc-*-sunos5*)
		CFLAGS="-DSYSV4 -DSYSV -DSUN4 -DSUN5"
		LIBS="-lsocket -lnsl"
		CC="cc"
		;;
	sparc-*-sunos4.0*)
		CFLAGS="-DSUN4"
		;;
	sparc-*-sunos4*)
		CFLAGS="-DSUN4"
		;;
	sparc-*-sunos3*)
		;;
	sparc-*-sysv4*)
		xm_file=sparc/xm-sysv4.h
		tm_file=sparc/sysv4.h
		tmake_file=t-svr4
		xmake_file=sparc/x-sysv4
		;;
	sparclite-*-*)
		cpu_type=sparc
		tm_file=sparc/lite.h
		use_collect2=yes
		;;
	sparc64-*-aout)
		cpu_type=sparc
		tmake_file=sparc/t-sp64
		tm_file=sparc/sp64-aout.h
		;;
	sparc64-*-elf)
		cpu_type=sparc
		tmake_file=sparc/t-sp64
		tm_file=sparc/sp64-elf.h
		;;
	tahoe-harris-*)			# Harris tahoe, using COFF.
		;;
	tahoe-*-bsd*)			# tahoe running BSD
		;;
	tron-*-*)
		cpu_type=gmicro
		use_collect2=yes
		;;
	vax-*-bsd*)			# vaxen running BSD
		use_collect2=yes
		;;
	vax-*-sysv*)			# vaxen running system V
		xm_file=vax/xm-vaxv.h
		tm_file=vax/vaxv.h
		;;
	vax-*-ultrix*)			# vaxen running ultrix
		tm_file=vax/ultrix.h
		use_collect2=yes
		;;
	vax-*-vms*)			# vaxen running VMS
		xm_file=vax/xm-vms.h
		tm_file=vax/vms.h
		;;
        pdp11-*-*)
		xm_file=pdp11/xm-pdp11.h
		tm_file=pdp11/pdp11.h
		;;
	we32k-att-sysv*)
		cpu_type=we32k
		use_collect2=yes
		;;
	*)
		echo "Configuration $machine not supported" 1>&2
		exit 1
		;;
	esac

	case $machine in
	*-*-sysv4*)
		fixincludes=fixinc.svr4
		xmake_try_sysv=x-sysv
		broken_install=yes
		install_headers_dir=install-headers-cpio
		;;
	*-*-sysv*)
		broken_install=yes
		install_headers_dir=install-headers-cpio
		;;
	esac

	# Distinguish i386 from i486/i586.
	# ??? For the moment we treat i586 as an i486.
	# Also, do not run mips-tfile on MIPS if using gas.
	case $machine in
	i[45]86-*-*)
		target_cpu_default=2
		;;
	mips-*-*)
		if [ x$gas = xyes ]
		then
			target_cpu_default=16
		fi
		;;
	alpha-*-*)
		if [ x$gas = xyes ]
		then
			target_cpu_default=4
		fi
		;;
	esac

	# No need for collect2 if we have the GNU linker.
	case x$gnu_ld in 
	xyes)
		use_collect2=
		;;
	esac

# Default certain vars that apply to both host and target in turn.
	if [ x$cpu_type = x ]
	then cpu_type=`echo $machine | sed 's/-.*$//'`
	fi

# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
	if [ x$pass1done = x ]
	then
		if [ x$xm_file = x ]
		then build_xm_file=$cpu_type/xm-$cpu_type.h
		else build_xm_file=$xm_file
		fi
		pass1done=yes
	else
		if [ x$pass2done = x ]
		then
			if [ x$xm_file = x ]
			then host_xm_file=$cpu_type/xm-$cpu_type.h
			else host_xm_file=$xm_file
			fi
			if [ x$xmake_file = x ]
			then xmake_file=$cpu_type/x-$cpu_type
			fi
			host_xmake_file=$xmake_file
			host_broken_install=$broken_install
			host_install_headers_dir=$install_headers_dir
			host_truncate_target=$truncate_target
			pass2done=yes
		fi
	fi
done

# Default the target-machine variables that were not explicitly set.
if [ x$tm_file = x ]
then tm_file=$cpu_type/$cpu_type.h; fi

if [ x$header_files = x ]
then header_files=; fi

if [ x$xm_file = x ]
then xm_file=$cpu_type/xm-$cpu_type.h; fi

md_file=$cpu_type/$cpu_type.md

if [ x$out_file = x ]
then out_file=$cpu_type/$cpu_type.c; fi

if [ x$tmake_file = x ]
then tmake_file=$cpu_type/t-$cpu_type
fi

# Set up the list of links to be made.
# $links is the list of link names, and $files is the list of names to link to.
files="$host_xm_file $tm_file $out_file $xm_file $build_xm_file $md_file"
links="config.h tm.h aux-output.c tconfig.h hconfig.h"

if [ "x$md_cppflags" = x ]
then links="$links md"
else links="$links md.pre-cpp"
fi

rm -f config.bak
if [ -f config.status ]; then mv -f config.status config.bak; fi

touch .configured

echo "Making Makefiles..."; mv Makefile Makefile.bak; echo "CC = $CC" > Makefile; echo "CFLAGS = $CFLAGS" >> Makefile; echo "LIBS = $LIBS" >> Makefile; cat Makefile.std >> Makefile; echo "Making binaries..."; make
